MIL-S800 User’s Guide 8 port 10/100BASE-TX Switch
7 Chapter 4 Troubleshooting • Power If the power indicator is not on after the power cord is plugged in, check the power outlet or power cord. If
8 Chapter 5 Product Specification 5-1 General Specification Standard Compliance IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet Nu
9 90000377_F
Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class B - EN55024 Canadian EMI Notice This Class A digital
Table of Contents Chapter 1. Introduction Pg 1 1-1 General Description……………………………………. Pg. 1 1-2 Key Features……………………………………………… Pg. 1
1 Chapter 1 Introduction 1-1 General Description The MIL-S800 switch provides eight auto-sensing 10/100Mbps RJ45 Ethernet ports. This high performanc
2 1-3 Package Contents Your package contents should include the following parts: • One 8-port Auto-sensing switching Hub • One DC power adapter •
3 1-4 Hardware Description The Front Panel The front panel contains power and LED Indicators. Figure 2. Front panel view of the MIL-
4 Chapter 2 Hardware Installation 2-1 Quick Installation • The MIL-S800 should be placed in a well-ventilated room with proper temperature and hum
5 2-2 LED Descriptions Figure 5. Front panel view of LED indicators The following table lists the LEDs and their function.
6 Chapter 3 Network Application 3-1 Stand Alone The application of a simple standalone switch is illustrated below. The maximum distance between the
Comments to this Manuals