Milan Technology MIL-SM2401MAF User Manual Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 178
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
70
System log Client Configuration Interface
Port Configuration
You can set up every port status.
1. Select <Edit>
2. Use “Tab/Backspace” key to move between items.
3. Type: display port connection speed.
4. State: Current port status. The port can be set to disable or enable mode. If the port
setting is disable then will not receive or transmit any packet.
5. Negotiation: set auto negotiation function of port.
6. Speed/Duplex: set the port link speed and duplex mode.
7. FC: enable or disable Flow control function (Flow control for full duplex link mode).
8. BP: enable or disable Back Pressure function (Backpressure for half duplex mode).
9. Bandwidth In/ Out: per port packet transmission rate control. Per level is 100Kbps. It
supports individual control method of TX and RX.
10. Priority: set packet of port to high or low priority queue.
11. Security: enable or disable port security function.
12. Select the <Apply>.
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 177 178

Comments to this Manuals

No comments