Milan Technology MIL-SM8002TG User Manual download pdf (Page 162)

154

Configure per port priority level.

 Port 1 ~ G1& 2: each port has 4 priority levels – High, Middle, Low, and Lowest.

 Click

Apply

COS Configuration

Set up the COS priority level.

 COS priority: Set up the COS priority level 0~7 –High, Middle, Low, Lowest.

 Click

Apply

TOS Configuration

Set up the TOS priority.

 TOS priority: the system provides 0~63 TOS priority level. Each level has 4 types of

priority – high, mid, low, and lowest. The default value is “Lowest” priority for each level.

When the IP packet is received, the system will check the TOS level value in the IP

packet that has received. For example: user set the TOS level 25 is high. The port 1 is

following the TOS priority policy only. When the port 1 packet received, the system will

check the TOS value of the received IP packet. If the TOS value of received IP packet is

25(priority = high), and then the packet priority will have highest priority.

 Click

Apply

SNTP Configuration

You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows

you to synchronize switch clocks in the Internet.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 179 180

No comments

Milan Technology MIL-SM8002TG User Manual Page 162