Milan Technology MIL-SM8002TG User Manual download pdf (Page 16)

Rear Panel

The 3-pronged power plug are located at the Rear Panel of the switch as shown in figure.

The Switches will work with AC in the range 90-240V AC, 50-60Hz.

Rear Panel of the switch

Desktop Installation

Set the switch on a sufficiently large flat space with a power outlet nearby. The surface

where you put your Switch should be clean, smooth, level, and sturdy. Make sure there is

enough clearance around the Switch to allow attachment of cables, power cord and air

circulation.

Attaching Rubber Feet

1. Make sure mounting surface on the bottom of the Switch is grease and dust free.

2. Remove adhesive backing from your Rubber Feet.

3. Apply the Rubber Feet to each corner on the bottom of the Switch. These footpads

can prevent the Switch from shock/vibration.

Power On

Connect the power cord to the power socket on the rear panel of the Switch. The other

side of power cord connects to the power outlet. The internal power works with AC in the

voltage range 90-240VAC, frequency 50~60Hz. Check the power indicator on the front

panel to see if power is properly supplied.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 179 180

No comments

Milan Technology MIL-SM8002TG User Manual Page 16